(r)

Demonstration

Terminal velocity. Set up an airtrack with the trolly and a large board at one end and a motion sensor at the other. The trolley is pulled by a mass and the board is used to create air resistance. Use the PASCO motion sensor to measure s-t.

Analysis

Create v-t and a-t graphs from the data and discuss the motion caused by the resultant force.

Equipment

1x airtrack 1x trolley 1x masses 1x PASCO motion sensor 1x large board

Safety

The masses must be free to fall without hitting anyone's foot.

Demonstration

Terminal vlocity. Barbie on a parachute from a high building.

Analysis

Discuss and identfy the forces acting on Barbie whilst in flight.

Safety

Make sure there is no body below in the drop zone.

Demonstration

Falling stones. Get the class to use their knowledge of suvat to calculate where you would have to tie 6 stones along a rope, so when they are dropped they hit the floor at 0.25 second intervals. Then with their calculated distances, tie on the stones and drop from a high place or stair well.

Analysis

Go through calculations before the rope is tied to the stones.

Equipment

1x long string, 1x 6 small rocks/pebbles

Safety

Make sure there is no body below in the drop zone.